Medias Mediatrix 1204, Reference Manual

Page: 152 / 390

Chapter 8 - IP Address and Network Configuration Services
126 Mediatrix 1204
SIP Servers
The ipAddressConfigSipServer group provides the configuration necessary for contacting different SIP
servers.
X
To select the SIP Servers configuration source:
1. In the ipAddressConfig folder, locate the sipServerSelectConfigSource variable (under the
ipAddressConfigSipServer group).
2. Set this variable to either static or dhcp (vendor/site specific option).
In the Unit Manager Network Administration Manual , refer to chapter Signalling Protocols Parameters , section
SIP Configuration Window .
Note:
Although the DHCP option #120 is reserved for SIP servers, no standard currently defines the
content and layout of this option.
Note:
If, for a given server, the port is 0, then the host and port for this server are obtained through a DNS
SRV request. See “Chapter 10 - DNS SRV Configuration” on page 145 for more details.
Table 74: SIP Servers Source
Variable Default Static Value DHCP Source
sipHomeDomain
ProxyHost “192.168.0.10” Use option specified in variable
sipHomeDomainProxyDhcpSiteSpecificCode ,
bytes 0-3.
If not specified (0), use option 43, sub-option
204, bytes 0-3
sipHomeDomain
ProxyPort 0 Use option specified in variable
sipHomeDomainProxyDhcpSiteSpecificCode ,
bytes 4-5.
If not specified (0), use option 43, sub-option
204, bytes 4-5. If bytes 4-5 are not present, use
the default static value.
sipOutboundProxy
Host “0.0.0.0” Use option specified in variable
sipOutboundProxyDhcpSiteSpecificCode , bytes
0-3.
If not specified (0), use option 43, sub-option
205, bytes 0-3.
sipOutboundProxy
Port 0 Use option specified in variable
sipOutboundProxyDhcpSiteSpecificCode , bytes
4-5.
If not specified (0), use option 43, sub-option
205, bytes 4-5. If bytes 4-5 are not present, use
the default static value.
sipRegistrarHost “192.168.0.10” Use option specified in variable
sipRegistrarDhcpSiteSpecificCode , bytes 0-3.
If not specified (0), use option 43, sub-option
203, bytes 0-3.
sipRegistrarPort 0 Use option specified in variable
sipRegistrarDhcpSiteSpecificCode , bytes 4-5.
If not specified (0), use option 43, sub-option
203, bytes 4-5. If bytes 4-5 are not present, use
the default static value.