Medias Mediatrix 1204, Reference Manual

Page: 149 / 390

Services Reference Manual (SIP Version)
Mediatrix 1204 123
Image
The ipAddressConfigImage group provides the configuration necessary to download applications into the
Mediatrix 1204. This includes emergency downloads in case of repetitive failure to start the main application.
X
To select the Image configuration source:
1. In the ipAddressConfig folder, locate the imageSelectConfigSource variable (under the
ipAddressConfigImage group).
2. Set this variable to either static or dhcp (vendor/site specific option).
In the Unit Manager Network Administration Manual , refer to chapter Administration Parameters , section
Software and Emergency Download .
Table 70: Image Information Source
Variable Default Static Value DHCP Source
imagePrimaryHost “192.168.0.10” Use option specified in variable
imageDhcpPrimarySiteSpecificCode , bytes 0-
3.
If not specified (0), use option 43, sub-option
117, bytes 0-3.
imagePrimaryPort 69
a
a. This is the well-known TFTP port number as per RFC 1340.
Use option specified in variable
imageDhcpPrimarySiteSpecificCode , bytes 4-
5.
If not specified (0), use option 43, sub-option
117, bytes 4-5. If bytes 4-5 are not present, use
the default static value.
imageSecondaryHost “192.168.0.10” Use option specified in variable
imageDhcpSecondarySiteSpecificCode , bytes
0-3.
If not specified (0), use option 43, sub-option
118, bytes 0-3.
imageSecondaryPort 69
a
Use option specified in variable
imageDhcpSecondarySiteSpecificCode , bytes
4-5.
If not specified (0), use option 43, sub-option
118, bytes 4-5. If bytes 4-5 are not present, use
the default static value.