4. Before plugging in the SSD into your computer or
laptop, please make sure that any screws or brackets
are mounted to the SSD.
When plugging in the SSD, please check for the right
connection of the SATA and power port.
5. Once the SSD is connected and mounted properly,
you can reassemble your computer or notebook.
While reassembling, please check carefully that no
cables or other components of your device get
squeezed or damaged and make sure that you have
not missed any screws or other components.
6. The SSD is installed successfully and ready to use.
In case you´ve not copied your old drive to the SSD, you
can start now to install your operating system,
additional software and drivers.
GB
Getting started and operation
SOLID S
TA
TE DRIVE
SATA 6 Gb/s,
7pin
Power DC 5V,
15pin
4.
SOLID S
TA
TE DRIVE
5.
Boot your computer
or reinstall your software
6.
