Medialon MAS Pro Dante User'S Reference Manual Download

Page: 51 / 88

Maintenance

Medialon MAS Pro Dante User Manual

p 51 of 88

M516-2 | 2020-05-19

Maintenance

In this section, you will learn how to maintain your MAS Pro audio server.

6.1

Medialon Audio Server Setup

MAS Pro settings are changed locally on the MAS Pro hardware. Remote Medialon Audio Client

software cannot change the system setup.

Clicking on the “Server > Setup...” menu item displays the Setup dialog box which allows to set up

various system parameters of the MAS Pro.

6.1.1

LAN 1

It is recommended to plug the LAN 1 on the Audio network (Dante) in order to use the Dante

controller utility. MAS Pro is configured to use DHCP to get its IP address. If your network

installation has no DHCP server or requires another IP address, open the Setup menu and change
the Network settings.

Summary of Contents for MAS Pro Dante

























































































Search results

Summary of Contents for MAS Pro Dante

Reviews:

Related manuals for MAS Pro Dante

Brands by name

Popular brands

Medialon MAS Pro Dante, User'S Reference Manual

Search results

Summary of Contents for MAS Pro Dante

Reviews:

Related manuals for MAS Pro Dante

Brands by name

Popular brands