Media5 Mediatrix 4104, Reference Manual

Page: 91 / 466

SIP Authentication Reference Manual (SIP Version)
Mediatrix 4104 69
5. Click Submit if you do not need to set other parameters.
SIP Authentication
The Authentication sub-page of the SIP page allows you to configure the unit and user agent authentication
parameters of the Mediatrix 4104.
Authentication information allows you to add some level of security to the Mediatrix 4104 lines by setting user
names and passwords. You can add two types of authentication information:

user agent specific authentication
You can define up to five user names and five passwords for each user agent of the Mediatrix 4104.
A user agent can thus register with five different realms.

unit authentication
You can define up to five user names and five passwords for the Mediatrix 4104. These user names
and passwords apply to all lines of the unit.
When a realm requests authentication, the user agent specific authentication is tried first, and then the unit
authentication if required.
You can also set these parameters via SNMP, as described in “Authentication” on page 260 .

To set the SIP security parameters:
1. In the web interface, click the SIP link, then the Authentication sub-link.
Figure 34: SIP – Authentication Web Page
Standards Supported Basic and Digest authentication as per RFC 3261
3 2 4
7 6 8
5
9