Media5 Mediatrix 4104, Reference Manual

Page: 54 / 466

Chapter 3 - Web Interface – Management Admin Page
32 Mediatrix 4104
3. Click Submit if you do not need to set other parameters.
Group Port Management
You can set the administrative state of all the lines of the Mediatrix 4104.

To set the group port management parameters:
1. In the Group Port Management section of the Admin page, select the proper command to execute
in the Group Port Command field.
Figure 13: Group Port Management Section
This command locks/unlocks all the lines of the Mediatrix 4104. This state is kept until the unit
restarts. It offers the following settings:
2. Click Submit if you do not need to set other parameters.
Interface Management
You can set the administrative state of a line that will be kept until the Mediatrix 4104 restarts.

To set the interface management parameters:
1. In the Interface Management section of the Admin page, select the proper command to execute in
the Command column.
Figure 14: Interface Management Section
updateConfiguration Downloads configuration files. See “Configuration File Download” on
page 38 for more details.
Table 20: System Commands (Continued)
Command Description
Table 21: Group Port Settings
Setting Description
noOp No action is taken.
unlockAllPorts Registers all the lines to the SIP server.
lockAllPorts Cancels all the lines registration to the SIP server. Active calls in
progress remain established until normal call termination. No new calls
may be initiated.
1
1