Media5 Mediatrix 4104 Reference Manual Download Page 396

Page: 396 / 466

Appendix B - Standard Hardware Information

Product Architecture Details

374

Mediatrix 4104



Activity/In-Use LED indication on FXS ports



Ready LED

Interfaces



4 x RJ-11 connectors, analog phone/fax (FXS) interface.



1 x RJ-11 connector, PSTN bypass.



1 x RJ-45 WAN connector, 10/100 BaseT Ethernet access with auto MDI/MDIX (cross-over
Ethernet cable not required).



1 x RJ-45 LAN connector, 10/100 BaseT Ethernet access with auto MDI/MDIX (cross-over
Ethernet cable not required).

Power



Integrated universal power supply input that can accept 100 to 240 Vac, 50/60 Hz input.



Seamless switch over period if the client UPS detects a power loss and activates within 8 ms.

Casing / Installation



Casing: Desktop (Plastic ABS UL94 V0).



Installation: The Mediatrix 4104 is designed for the desktop or can be wall-mountable.

Product Architecture Details



Supports four concurrent communications using any vocoders.



DSP-based DTMF detection, generation and synthesis.



DSP-based echo cancellation (G.168).



DSP-based fax/data relay.



Embedded operating system with 32-bit real-time multitasking Kernel.



Embedded IPv4 TCP/IP stack with configurable QoS implemented by:

•

ToS byte at Network layer 3

•

802.1p at Data Link layer 2



Network parameters assigned via DHCP

Real Time Fax Router Technical Specifications

Automatic selection between voice and fax.

Table 232:

Fax Technical Specifications

Parameter

Description

Protocols

Group 3 Fax

Clear channel (G.711), G.726, or T.38 Real Time Fax Over IP protocol
Stack

Fax Data Compression

Fax Transmission

Up to 14.4 kbps

Summary of Contents for Mediatrix 4104



















































































































































































































































































































































































































































































Search results

Summary of Contents for Mediatrix 4104

Reviews:

Related manuals for Mediatrix 4104

Brands by name

Popular brands

Media5 Mediatrix 4104, Reference Manual

Search results

Summary of Contents for Mediatrix 4104

Reviews:

Related manuals for Mediatrix 4104

Brands by name

Popular brands