Media5 Mediatrix 4104 Reference Manual Download

Page: 387 / 466

Mediatrix 4104

365

P P E N D I X

Standards Compliance and

Safety Information

This Appendix lists the various standards compliance of the Mediatrix 4104.

Standards Supported

The Mediatrix 4104 complies to the following standards:

Table 230:

Standards Compliance

Category

Specification

Agency approvals

•

European Union, CE mark (Declaration of Conformity)

•

Anatel

•

FCC

Safety standards

•

UL60950-1 1

Edition (2006)

•

CAN/CSA-C22.2 No. 60950-1-03 1

Edition (2006)

•

IEC 60950-1 (1

Edition 2001 With all national deviations)

•

Anatel Resolution 442

Emissions

•

FCC Part 15:1998 Class B

•

EN55022 (2006) Class B, with amendments A1 (2007)

•

EN61000-3-2 (1995) Harmonic current emissions

•

EN61000-3-3 (1995) Voltage fluctuations and flicker

•

Anatel Resolution 512:2008

Immunity

EN55024:1998 with amendments A1 (2001) and A2 (2003) including the following:

•

EN61000-4-2 (1995), ESD

•

EN61000-4-3 (1996), Radiated RF

•

EN61000-4-4 (1995), Burst Transients

•

EN61000-4-5 (1995), Surge

•

EN61000-4-6 (1996), Conducted RF

•

EN61000-4-11 (1995), Voltage Dips and Interruptions

Telecom

•

FCC Part 68:Subpart D

•

Industry Canada CS-03, issue 9, Part I, November 15, 2004

Note:

The standards compliance of the Mediatrix 4104 are printed on a sticker located on the bottom of the

unit.

Summary of Contents for Mediatrix 4104



















































































































































































































































































































































































































































































Search results

Summary of Contents for Mediatrix 4104

Reviews:

Related manuals for Mediatrix 4104

Brands by name

Popular brands

Media5 Mediatrix 4104, Reference Manual

Search results

Summary of Contents for Mediatrix 4104

Reviews:

Related manuals for Mediatrix 4104

Brands by name

Popular brands