Media5 Mediatrix 4104, Reference Manual

Page: 336 / 466

Chapter 23 - Subscriber Services Call Waiting
314 Mediatrix 4104
This sequence could be something like *70.
4. Wait for the transfer tone (three “beeps”) followed by the dial tone.
The call waiting tone is disabled.

To re-enable the call waiting tone:
1. Take the receiver off-hook.
2. Replace the receiver on-hook.
The call waiting tone is re-enabled.
Permanently Removing the Call Waiting Tone
You can permanently activate/deactivate the call waiting service.

To activate the call waiting service:
1. Take the receiver off-hook.
2. Wait for the dial tone.
3. Dial the sequence the system administrator has implemented to activate the call waiting tone
service.
This sequence could be something like *84.
4. Wait for the transfer tone (three “beeps”) followed by the dial tone.
5. Hang up your telephone.
The call waiting tone is enabled.

To cancel the call waiting service:
1. Take the receiver off-hook.
2. Wait for the dial tone.
3. Dial the sequence the system administrator has implemented to deactivate the call waiting tone
service.
This sequence could be something like *85.
4. Wait for the transfer tone (three “beeps”) followed by the dial tone.
The call waiting is cancelled.
5. Hang up your telephone.