Media5 Mediatrix 4104, Reference Manual

Page: 223 / 466

Management Server Reference Manual (SIP Version)
Mediatrix 4104 201
Syslog Messages
A syslog message is sent whenever it is impossible for the management server to download a configuration
file or when it is impossible to apply the new settings to the unit.
Invalid file format Committing a file with an invalid
format. Send a syslog warning message including the
file name and the TFTP client address:
The configuration file “XXX” pushed to
the unit by the TFTP client “XXX” has
an invalid format.
No recorded settings applied.
File size too big Downloading a file with a size
exceeding 512000 bytes. Send a syslog warning message including the
file name, the TFTP client address, the file size
and the maximum allowed size:
The configuration file “XXX” from the
TFTP client “XXX” is not downloaded
because its size “XXX bytes” exceeds
the maximum allowed size “XXX bytes”.
Send error code 3 (disk full or allocation
exceeded) to the TFTP client.
Set sysAdminDownloadConfigFileStatus to fail
and send msTrapStatusConfigFile .
TFTP transfer error Received a TFTP error from the
TFTP client. Send a syslog warning message including the
file name and the TFTP client address:
Error in the TFTP transfer of the
configuration file “XXX” from the TFTP
client “XXX”.
Set sysAdminDownloadConfigFileStatus to fail
and send msTrapStatusConfigFile .
TFTP transfer aborted The transfer was aborted while
in progress by changing the
value of
sysConfigDownload
ConfigMode or
sysConfigDownloadConfigFile .
Send a syslog warning message including the
file name and the TFTP client address:
The TFTP transfer of the configuration
file “XXX” from the TFTP client “XXX”
was aborted.
Set sysAdminDownloadConfigFileStatus to fail
and send msTrapStatusConfigFile .
File pulling not allowed A TFTP client is trying to read a
file from the unit.
Send a syslog informational message including
the file name and the TFTP client address:
The TFTP client “XXX” is trying to
pull the file “XXX” from the unit.
This is not allowed.
Send error code 2 (access violation) to the
TFTP client.
Table 123: Configuration File Error Handling with the Management Server (Continued)
Error Type Cause Behaviour
Table 124: Syslog Messages Using the Management Server
Level Message Event
Warning The notification “XXX” could not
be sent to msHost “XXX” and
msTrapPort XXX. A SNMP trap could not be sent to the
management server. The syslog warning
message includes the SNMP trap number, the
management server address and port.