Media5 Mediatrix 4104, Reference Manual

Page: 169 / 466

Services Reference Manual (SIP Version)
Mediatrix 4104 147
Management Server
The ipAddressConfigMs group provides the configuration necessary for contacting a SNMP management
server such as the Media5 Unit Manager Network.

To select the Management Server configuration source:
1. In the ipAddressConfig folder, locate the msSelectConfigSource variable (under the
ipAddressConfigMs group).
2. Set this variable to either static or dhcp (vendor/site specific option).
imageSecondaryHost “192.168.0.10” Use option specified in variable
imageDhcpSecondarySiteSpecificCode , bytes
0-3.
If not specified (0), use option 43, sub-option
118, bytes 0-3.
imageSecondaryPort 69
a
Use option specified in variable
imageDhcpSecondarySiteSpecificCode , bytes
4-5.
If not specified (0), use option 43, sub-option
118, bytes 4-5. If bytes 4-5 are not present, use
the default static value.
a. This is the well-known TFTP port number as per RFC 1340.
Table 83: Image Information Source (Continued)
Variable Default Static Value DHCP Source
In the Unit Manager Network Administration Manual , refer to chapter Administration Parameters , section Unit
Manager Server .
Table 84: Management Server Source
Variable Default Static Value DHCP Source
msHost N/A Use option specified in variable
msDhcpSiteSpecificCode , bytes 0-3.
If not specified (0), use option 43, sub-option
200, bytes 0-3.
msStaticHost “192.168.0.10” N/A
msTrapPort N/A Use option specified in variable
msDhcpSiteSpecificCode , bytes 4-5.
If not specified (0), use option 43, sub-option
200, bytes 4-5. If bytes 4-5 are not present, use
the default static value.
msStaticPort 162 N/A
msStaticTrapPort 162 N/A
Note:
If you change the value of the msStaticTrapPort variable, change the port used in the management
server. Not doing so will prevent you from viewing the received traps from the unit.