Media5 Mediatrix 4104, Reference Manual

Page: 132 / 466

Chapter 5 - Web Interface – Telephony Miscellaneous
110 Mediatrix 4104
f. The next-state parameter is the next tone state to use when the time has elapsed. This value
is not present if the
time
parameter is not present. You have already discarded the
time
parameter, so the next-state parameter is not required.
The on-state-description parameter is now:
on-state-description = "on" [ ":f1" ] [ ":f2" ]
g. You can now complete the third
state-description
parameter and the
states-section
parameter:
states-section = ",s1=" ( "on" [ ":f1" ] [ ":f2" ] [ :100 ] [ :s2 ])
[ ",s2=" "off" [ :100 ] [ :1 ][ :s1]
[ ",s3=" state-description ] ]
becomes:
states-section = ",s1=" ( "on" [ ":f1" ] [ ":f2" ] [ :100 ] [ :s2 ])
[ ",s2=" "off" [ :100 ] [ :1 ][ :s1]
[ ",s3=" "on" [ ":f1" ] [ ":f2" ] ] ]
8. Now that you have the three main categories completed, you can finish the pattern:
Pattern = [ f1=350:-17,f2=440:-17 [ "," "l=" 3 ] "," ",s1=" ( "on" [ ":f1" ]
[ ":f2" ] [ :100 ] [ :s2 ])
[ ",s2=" "off" [ :100 ] [ :1 ][ :s1]
[ ",s3=" "on" [ ":f1" ] [ ":f2" ] ] ] ]
If you remove all the brackets and quotation marks, which are not to be included, the pattern is:
Pattern = f1=350:-17,f2=440:-
17,l=3,s1=on:f1:f2:100:s2,s2=off:100:1:s1,s3=on:f1:f2
Ther pattern could also be defined as follows:
Pattern = f1=350:-17,f2=440:-
17,s1=on:f1:f2:100:s2,s2=off:100:s3,s3=on:f1:f2:100:s4,s4=off:100:s5,s5=on:f
1:f2:100:s6,s6=off:100:s7,s7=on:f1:f2
Message Waiting Indicator
The Message Waiting Indicator (MWI) service alerts the user when new messages have been recorded on a
voice mailbox.
When the user receives a call and does not answer, the notification mechanism detects this situation and starts
the auto attendant. The caller can then leave a message.
After the message is recorded, the server sends a message to the Mediatrix 4104 listing how many new and
old messages are available. The Mediatrix 4104 alerts the user of the new message in two different ways:

The telephone’s LED blinks (if present).

A message waiting stutter dial tone replaces the normal dial tone when the user picks up the
first line.
Standard MWI Methods
The Mediatrix 4104 supports two MWI methods.
Note:
The message waiting state does not affect the Second Line feature. When in an active call,
performing a flash-hook to get access to the second line plays the usual dial tone.