User manual
2 in 1 Steering Wheel
MT178
Thank You for buying our new outstanding 2 in 1
steering wheel. You can use this device with 3 diff er-
ent game machines: Playstation I & II and ordinary PC.
Please read this manual carefully before use Your new
steering wheel.
MEDIA-TECH
Installation
Attention: Always install the software fi rst before
hardware installation.
Software installation
Disc which comes together with steering wheel con-
tains the software needed for your device setup.
1. Insert driver CD disc into your CD-ROM drive and
wait for a few seconds for your computer to load
the disc.
2. If your system is setup to automatically read a new
inserted CD, then the auto run program is executed
and the opening screen for installation appears.
Please follow the on-screen instruction to install the
drivers step-by-step.
If your system doesn’t launch the installation software
automatically, please fi nd the auto execute fi le “setup.
exe”, which is located under the directory of your CD
drive and click on it, then follow the on-screen instruc-
tion to install the software.
Upon completing software installation, restart your PC.
Connecting the racing wheel to your computer as shown:
Testing
Enter Start > Setup > Control Panel > Game controllers
Function Test page.
Test the directions of Steering
Wheel and Foot Pedal and buttons.
Vibration Test.
Press graphic buttons in this pane to
test vibrations.
Troubleshooting
After setting up Software and Hardware, the steering
wheel still cannot work.
Please check whether the steering wheel cable is
steadily connected with your PC. Make sure that the
indication of the option “Game Port Steering Wheel
Controller” in the “Game Controller” in menu “Control
Panel” is “Confi rmation”, and “Controller ID” shows “1”.
Make sure that I/O value of steering wheel doesn’t im-
pact with that of other accessories. Please restart your
PC if the steering wheel still cannot work.
The driving system cannot be installed or there is no
reaction while testing the steering wheel after instal-
lation.
DirectX Version is too low. Please change to DirectX 7.0
Version or up.
There is no vibration from motor while playing rac-
ing games.
Exit the game and reset. If it still cannot work normally,
restart your PC.
The intensity of the motor becomes weak after enter-
ing the games.
Please read game manual in Confi gure controller sec-
tion.
RUMBLE RACER 2
