media-tech MT4058 User Manual Download Page 4

4

EN

GPS antenna

Please mount GPS antenna inside car on the windshield, 

we recommend to place it in the corner of windshield. 

Before first use

Put microSD card (pins should face device built-in spea-

ker). Next plug USB cable to USB charger or PC computer 

for few hours to fully charge the device. 

Notea! Device supports microSD class10 or faster flash cards. 

Slower flash cards are not supported.  

Precautions:

 Always use device with charger plugged in. Built-in 

battery is used to maintain user settings and to record 

movie after unexpected power loss (after car accident 

for i.e.).

  Always operate when car is parked. Using touch panel 

while driving may can distract a driver and cause a car 

accident as a result.

 It is recommended to use first at home, connect to 

WiFi network and update all default applications using  

GooglePlay store.

Power on

Plug car charger and start motor (then car lighter socket 

will be powered). You can also power on the device ma-

nually, press and hold POWER button for 3sec. System 

loads in about 30sec. By default, after system run device 

automatically opens DVR application and starts to record. 

 

Note! When device is working press shortly POWER button 

to switch off/on the LCD screen.

Power off

When turn engine off or when you unplug car charger, de-

vice will pop-up a message “…s power off” – let system to 

shutdown automatically. 
You can also power off the device manually – press and 

hold POWER button for 3sec, when menu pop-up  select 

option “power off”.

Note! Device is recording video from both cameras by de-

fault, recording from front camera are in folder Video/Front, 

recording from rear camera are in folder Video/Back.

Summary of Contents for MT4058











Reviews: