3
EN
1. Standby on/off button.
2. Repeat mode*.
3. Mode switch: Bluetooth/AUX-in/FM/USB/SD.
4. Previous track/radio channel
5. Next track/radio channel
6. EQ*: Normal/Bass/Pop/Rock/Jazz.
7. Play/Pause
8. Volume down
9. Volume up
10. Mute
11. Number keys*: quick select track (enter in following four
digit pattern, for instance to enter “5” track enter “0005”
and wait).
12. Stop
*)works only in SD/USB mode
Charging
Use USB cable and connect device via charger socket to
USB. When charger is plugged-in red LED will be on. Full
charging takes ca. 4 hours.
Note! Fully charge device before first use.
Important! During charging you can normally use the
device, however it is recommended to perform 3 full
charging cycles first in order to format built-in battery.
Power on/off
Slide POWER button in ON position to power on the de-
vice, slide into right end to enable illumination function.
You can also use remote control to enable/disable stand-
by mode.
Switching modes
Use MODE button to switch between modes: Bluetooth/
SD/USB/FM radio/AUX-in. Actual mode is displayed on the
status screen.
Volume control
Use master volume knob to set maximum volume level.
Use remote control to adjust volume as you like.
Bluetooth mode
Make sure you are switched into Bluetooth mode, use your
smartphone and search for Bluetooth devices. Select “A18”
on the list to pair device. Device does not require pass-
word. When pairing is successful you can open music ap-
plication. You can use buttons on the device or remote to
play/pause, to select previous/next track or adjust volume.
SD/USB mode
In this mode you can use standard control like play/pause,
next/previous track, volume control. You can also set re-
peat one/all function, and select one of defined EQ set-
tings. You may also use numeric keyboard to enter specific
track.
Note! Device is always resuming play. If you want to
play from beginning enter manually first track “0001”
or press STOP and then PLAY.
