14
15
English
3.7 How to Install the Memory Modules
(DDR3 Low Voltage (1.35V))
1. Carefully insert the SO-DIMM memory modules into the slot at a 30-degree angle.
2. Push down until the modules snap into place.
1. The NAS-9601 requires DDR3L SO-DIMM (1.35V).
2. For dual channel configuration, you always need to install identical (the same brand,
speed, size and chip-type) DDR3L SO-DIMM pairs.
The SO-DIMM only fits in one correct orientation. It will cause permanent damage to the
motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
