Lactina
®
Electric Breastpump
Screw cylinder tightly
into pump connector.
Attach pump connector
to Lactina, and rotate
until tab is secure in slot.
Push piston into
pumping arm, and
rotate until snug in
clamp.
3
4
5
Make sure breastshield
and connector are
securely attached.
Screw containers into
connectors.
Insert clear ends of
tubing into openings
in connectors.
Insert other ends of
tubing into ports in
pump connector.
IF SINGLE PUMPING:
insert plug into
unused port.
7
Center breastshields
over your nipples and
start pumping.
12
8
9
10
2
Kit Parts
Pump
Connector
Vacuum
Regulator
Ring
Collection
Container
Membrane
Valve
Container
Stand
Lid
Tubing
Quickstart Instructions
For Double &
Single Pumping
See Medela’s instruction
booklet for detailed kit assembly,
cleaning and pumping time
information.
Slide piston into
cylinder.
Push assembled valve
& membrane onto
connector.
6
1
Cylinder
Rubber
Seal
Piston
PersonalFit
™
Connector
PersonalFit
™
Breastshield
Medela, Inc., P.O. Box 660
McHenry, IL 60051-0660
Phone: 800-435-8316 or 815-363-1166
Fax: 815-363-1246
Email: [email protected]
www.medela.com
PersonalFit is a trademark of Medela.
Medela and Lactina are registered trademarks of Medela, Inc.
1907234 B 0403 ©2003 Medela, Inc.
11
Set vacuum regulator
ring to “MIN.” Adjust for
comfort once pumping
begins.
LctnaQst E_S 1907234B-rev_LactinaQstENG_SPN1907234 B 3_03.qxd 5/18/11 8:11 AM Page 1
