mectron MICROPIEZO, Use And Maintenance Manual

Page: 159 / 262

65
TECHNICAL DATA
11.2.3 Guide and the Manufacturer's Declaration - Electromagnetic
Immunity
11.2.3.1 Power Connection BC Input
MICROPIEZO is designed to operate in the electromagnetic environment specified below.
The client or user of MICROPIEZO should ensure that it is used in such an environment.
Phenomenon
Essential EMC
standard or test
method
Immunity test values
Electromagnetic
Environment Guidance
Electrical fast
transient/burst
a) l) o)
IEC 61000-4-4
±2 kV on contact
100 KHz repetition
frequency
The quality of the network
voltage should be that of a
typical commercial or hospital
environment.
Pulses
Differential
mode
a) b) j) o)
IEC 61000-4-5 ± 0.5 kV, ± 1 kV
The quality of the network
voltage should be that of a
typical commercial or hospital
environment.
Pulses
common
mode
a) b) j) k) o)
IEC 61000-4-5 ± 0.5 kV, ± 1 kV, ± 2kV
The quality of the network
voltage should be that of a
typical commercial or hospital
environment.
Conductive
disturbances
induced by RF
fields
c) d) o)
IEC 61000-4-6
3 V
m)
0.15 MHz - 80 MHz
6 V
m)
in the ISM bands
between 0.15 MHz and
80 MHz
n)
80 % AM at 1 KHz
e)
Portable and mobile RF
communication devices
should not be used near any
part of the product, including
cables, except when they
respect the recommended
and calculated distances from
the equation applicable at the
frequency of the transmitter.
Voltage dips
f) p) r)
IEC 61000-4-11
0% UT; 0,5 cycle g)
At 0°, 45°, 90°, 135°,
180°, 225°, 270° and
315°
The quality of the network
voltage should be that of a
typical commercial or hospital
environment.
0 % UT; 1 cycle e
70 % UT; 25/30 cycle
h)
Single phase: at 0°
Voltage
interruptions
f) i) o) r)
IEC 61000-4-11 0% UT; 250/300 cycle
h)
The quality of the network
voltage should be that of a
typical commercial or hospital
environment.