mectron MICROPIEZO, Use And Maintenance Manual

Page: 132 / 262

38
MICROPIEZO
8.3 Manual Cleaning with Enzymatic Detergent and
Running Water
The following procedure must be carried out on the tank and cap of the device.
8.3.1 Preparation
1. Disconnect the tank from the machine
core unit (see Chapter 7 on page 33 );
2. Unscrew the cap from the tank.
CAUTION: Do not sterilise the tank and
cap in an autoclave. They could be damaged.
8.3.2 Required Materials
• Water;
NOTE: Do not use water with a temperature
higher than 60° C.
• Cleaning solution (pH 6-9);
• Clean, soft, low-lint cloth;
• Demineralised water.
8.3.3 Cleaning Method
Thoroughly rinse the inside and outside
of both the tank and cap under running
water;
1
Clean the external and internal surfaces
of the tank and cap with a clean, soft,
low-lint cloth, dampened with a mild
detergent solution (pH 6-9);
2
Thoroughly rinse the inside and outside
of the tank and cap under running water
to eliminate all residue of the detergent
solution;
3