Mect MPNE1001 Series, User Manual

Page: 33 / 45

Inputs/outputs modules: MPNE Mect Srl
32
ME7087_13 04/21
22
MPNE_PWM_OUT24_
OUT23_DC UINT 0 114 [RW] Duty Cycle for configured channels
such as PWM
Bit 0..7 –HEX Duty Cycle – output 23
Bit 8..15–HEX Duty Cycle – output 24
MPNE_ShuntExp1 UINT 0 115 [RO] Value in A x100. Current measured in
module 06 slot 1
MPNE_ExpDigitalOut
Config25_32 UINT 0 116 [RW] Configuring digital outputs module 06
(two bits per channel)
00: Standard output (default)
01: monostable
10: PWM with duty cycle at 50% (only
for outputs 30, 31 and 32)
11: PWM with duty cycle from 0% to
100% (only for outputs 30, 31 and 32)
MPNE_ExpPulseWidth2
_ms UINT 0 117 [RW] Pulse duration (ms) for outputs
configured as monostable
MPNE_Frequency_PWM2 UINT 0 118 [RW] PWM output rate for channels defined
as PWM
MPNE_PWM_OUT30_
OUT29_DC UINT 0 119 [RW] Duty Cycle for configured channels
such as PWM
Bit 0..7 not used
Bit 8..15 –HEX Duty Cycle – output
30
MPNE_PWM_OUT32_
OUT31_DC UINT 0 120 [RW] Duty Cycle for configured channels
such as PWM
Bit 0..7 –HEX Duty Cycle – output 31
Bit 8..15–HEX Duty Cycle – output 32
MPNE_ShuntExp2 UINT 0 121 [RO] Value in A x100. Current measured in
module 06 slot 2