Multitest 0.5dV, 1dV & 2.5dV
Service and Repair Manual
Number 022-780
Issue Number: 02
Page 12 of 32
9. VIC PCB Replacement
Warning:
General anti-static precautions should be observed whilst handling the PCB
36.
Remove the base plate as per 4, Instructions 1 to 5
37.
Locate the Vic PCB as identified in the
photograph
38.
Remove the transformer as per 5.
39.
40.
Remove all loom connections to the
PCB
41.
NOTE - record the connections before
removing
42.
Remove the 4-off M3x6 pan head pozi drive
screws retaining the control PCB on to the
hex pillars and lift out the PCB.
Refitting the PCBs is the reverse of the above procedure.
Note the following photographs and instructions
