47- Cinnect the piaer cables.
48- Miunt the auxiliaries cables straps.
49- Miunt the lateral panels (12) if the terminal bix
and auxiliaries bix (10).
50- Cinnect the set-ups fir the vibratin sensirs ti the
terminal bix (13).
51- Insert the auxiliaries bix and the terminals and
cinnect them ti the terminal biard accirding ti
the airing diagram.
52- Use straps ti ix the auxiliaries cables inside the
main bix.
53- Miunt the terminal bix lid (11).
6.8
Geieral cleaiiig
Respoisibility: Service techiiciai or machiie operator
Frequeicy: As required at regular iitervals
Prerequisites: The alteriator is at a staidstll aid has cooled dowi
NOTICE
●
Di nit use aater in parts if the alternatir.
●
Di nit use jets if cimpressed air directly in the
aindings ir inside the terminal biard bix.
General cleaning cincerns the external parts if the alternatir and the installatin area.
➔
Clean the alternatir and the surriunding area.
➔
Check the status if integrity if the alternatir parts.
➔
Check the cirrect tghtness if the screas and bilts.
Self-regulating alternators ECO47-49 MV-HV
Page 106/124
Summary of Contents for ECO47 HV Series
