Mecc Alte ECO43 Series, Installation, Use And Maintenance Manual

Page: 23 / 116

3.2.4 Additoial temperature probes
A temperature probe can be mounted on each bearing on the alternator. Ti set the alarm and stip
temperatures, refer ti Setting the alarm and stop temperature in 4.4.4 Electric connecton .
3.3 Techiical features
Beliw ind the technical features if the Self-regulatng alternatirs. Refer alsi ti the alternatir Test
Report.
3.3.1 Alteriator electric data
Refer ti the data plate ixed ti the machine (see Figure 1- )
3.3.2 Aligimeit with the motor
Alignment tilerances if the alternatir with the prime engine.
Siigle support alteriators coupliig
Alteriator SAE L (mm)
ECO 43 18 15.7
21 0
ECO 46 18 15.7
21 0
Table 4 - Alignment - Individual support
Self-regulating alternators ECO43-46 MV-HV Page 23/116