MEC-Energietechnik GmbH | Energiestrasse 3 | 9500 Villach |Austria
Phone: +43 (0) 4242 / 55 100 | fax: - 11 | e-mail: [email protected] | Web: www.mec-energietechnik.at
INSTRUCTION MANUAL
TriTask-40 Series
3-Step Lead/Acid Plug-Top Battery Charger
Version
MEC Art.-Nr.
Version
MEC Art.-Nr.
Version
MEC Art.-Nr.
6V - 2.7A
111-03272-130
12V
– 1.5A 111-06152-130
24V - 1.5A
111-12152-130
6V/12V - 2.7A 111-06272-131
12V
– 2.7A 111-06272-130
Dear Customer!
Thank you very much for your trust in us and our product.
Please read these operating instructions carefully
before
start of operation.
MEC-Energietechnik GmbH
1. Safety Rules and General Warnings
ATTENTION: 100-240 Volts AC voltage, device is not suitable for children
– danger of life!!
ATTENTION: The charger is exclusively designed for 6V/12V/24V rechargeable lead /acid batteries and must
not be used for other purposes.
ATTENTION: Please consider the charging instructions from the battery manufacturer before charging!
Never place the device on top of the battery while charging!
EXPLOSION RISK! Avoid sparks or open flames while charging!
Use the device only in dry rooms and protect against dust, heat (>40°C) and humidity (>80% rel.)
Protect against direct solar radiation.
No fluids of any kind must get into the device.
In case of obvious damage or malfunction immediately disconnect the device from mains supply and protect
against unintended reconnection
Clean with a dry cloth only.
DO NOT OPEN! Repair work must only be accomplished by authorized companies or specialized technical
staff.
Disconnect from mains before connecting or disconnecting the battery.
Do not recharge non-rechargeable batteries.