Meazura MEZ1000, User Manual, Page: 99 / 110

99
Part VIII
Beaming Information
Your Meazura™ MEZ1000 RDA is equipped with an IR (infrared) port that you can use to beam
information to another Aceeca connected device that's close by and also has an IR port. The IR port is
located at the top of the RDA, behind the small dark shield.
You can beam the following information between Aceeca connected organizers:
·
The record currently displayed in Date Book, Address Book, To Do List, or Memo Pad.
·
All records of the category currently displayed in the Address Book, To Do List, or Memo Pad
applications.
·
A special Address Book record that you designate as your business card, containing information
you want to exchange with business contacts.
·
An application installed in RAM memory.
NOTE
HotSync operations can also be done using the IR port. See "IR HotSync operations" in chapter 11
for more information.
For best results, Meazura™ MEZ1000 RDA's should be between 10 centimeters (approximately 4
inches) and 1 meter (approximately 39 inches) apart, and the path between the two devices must be
clear of obstacles. Beaming distance to other Aceeca connected devices may be different.
Beaming a business card
To select a business card for beaming:
1. Tap the Home icon to access the Applications Launcher menu.
2. Tap the Address Book icon.
3. In the Address List, create a new entry or select an entry that contains the information you want
on your business card. See "
Adding and using Address Book entries " in
" Using the Address Book " for more information.
4. In Address View, tap the Options icon and tap Record. Then tap Select Business card.
5. At the prompt, tap Yes.
Beaming a record
To beam a record, business card, or category of records:
1. From within Address Book, Date Book, Memo Pad or To Do List;
2. Locate the record, business card, item, memo or category you want to beam.
3. Tap the Options icon.
4. Tap Record.
5. Choose from the following options:
·
Depending on the application you are in, you can choose to beam an item, category, business
card, event, etc.
·
Use the Graffiti® 2 Command stroke /B to beam the current entry.