Meazura MEZ1000, User Manual

Page: 45 / 110

45
5. Choose from the following options:
·
To assign a password, enter the password again to verify it, and tap OK.
· To change your password, enter a new password and tap OK.
·
To delete your password, enter your current password. Tap OK, and then tap Delete.
Locking your RDA
You can turn off and lock your RDA with a password to protect information. You must then enter the
password when you turn on your device to gain access to the information on it.
If you forget the password, you must perform a hard reset to resume using your RDA. Performing a
hard reset deletes all the records in your RDA; however, you can restore all synchronized data at the
next HotSync operation. See "
Performing a hard reset " in chapter 1 for more information.
Locking your RDA with a password
1. Assign a password, as described in " Assigning and editing passwords " earlier in this chapter. A
password is required before using the Turn Off & Lock option.
2. Tap Turn Off & Lock Device. The System Lockout dialog box appears.
3. Tap Off & Lock. You device is turned off and is locked.
To turn on and unlock your RDA:
1. Turn on your RDA.
2. Enter your password at the prompt; then tap OK.
Recovering from a forgotten password
If the Off & Lock option is not active, and you forget your password, you can delete the forgotten
password from your RDA. Deleting a forgotten password also deletes all entries and files marked as
Private.
IMPORTANT
If you synchronize with your desktop computer before deleting a forgotten password, your RDA
restores private entries the next time you perform a HotSync operation, but does not restore the
forgotten password.
Deleting a forgotten password
1. Tap the Home icon to access the Application Launcher menu, tap the Security icon.
2. From the Security dialog box, tap Forgotten Password.
3. A message appears; tap Yes to delete the forgotten password.