Meatest 9010+, User Manual

Page: 42 / 79

Reading of the multimeter are statistically evaluated when STATISTICS function is switch on. Use
Statistics soft key to display statistic parameters. Symbol MATH is displayed in METER information
field. Following data are displayed:
- Min Minimum reading
- Max Maximum reading
- Span Max-Min difference
- Average Average value from all collected readings
- St. deviation Standard deviation of the collected readings
- Count Number of readings
STATISTICS function can be disabled by pushing soft button Statistics or readings can be reset by
pushing soft key Clear.
LIMITS function displays indication whether reading is inside or outside predefined limits. Lower and
upper limit must be entered before switching the function ON. Default value is 0.000000 for both values.
Indication of reading versus limits is displayed in METER field using LIMIT label with arrows showing
if the reading is below, inside or up. The LIMITS function is applicable in all meter functions.