Me TRACK-Guide II Installation And Operating Instructions Manual Download

Page: 54 / 77

Tractor-ECU application
Add a vehicle profile

V7.20160121

30302710-02-EN

Add a vehicle profile

List of vehicle profiles

Activated vehicle profile (the icon is marked in

green)

Information on the marked vehicle profile

List of all available vehicle profiles

Cursor

Function
icon

Meaning

Add a vehicle profile

Vehicle profile cannot be deleted

Delete the vehicle profile

Return

1. Call up the Tractor-ECU application:

| Tractor-ECU

- Call up the list of vehicles.

- Add a new vehicle profile.

⇨

A new vehicle profile appears on the screen.

⇨

You can now configure the parameters of the new vehicle profile.

Configuring the parameters for a vehicle profile

In a vehicle profile, you can set the sensors that you want to use.

8.1

Procedure

8.2

Summary of Contents for TRACK-Guide II














































































Search results

Summary of Contents for TRACK-Guide II

Reviews:

Related manuals for TRACK-Guide II

Brands by name

Popular brands

Me TRACK-Guide II, Installation And Operating Instructions Manual

Search results

Summary of Contents for TRACK-Guide II

Reviews:

Related manuals for TRACK-Guide II

Brands by name

Popular brands