Configuring the terminal in the Service application
Activating the "Diagnostics" function
7
30302710-02-EN
V7.20160121
49
⇨
The following screen will appear:
2. Click on "Pools".
⇨
The names of several folders will appear.
⇨
If the pool is empty, nothing will appear.
3. Click on the desired folder.
⇨
The contents of the folder will be displayed.
The names of the folders are the ISO IDs of the applications whose temporary data they
store.
4. Select the desired file.
5.
- Delete file.
⇨
Deleting file.
6.
- Restart terminal.
Activating the "Diagnostics" function
To activate the "Diagnostics" function, you must first activate its driver.
1. Switch to the "Driver" screen:
| Service | Driver
⇨
The following screen will appear:
2. Click on "Diagnostics".
3. Click on the "DiagnosticsServices" driver.
7.16
Procedure
