7
Configuring the terminal in the Service application
Configuring the joystick button allocations
42
V7.20160121
30302710-02-EN
Function icon
Meaning
Zooming in for camera images.
Zooming out for camera images.
Activating automatic camera mode.
In automatic mode the camera images will be automatically displayed if a
sensor sends a signal to do so.
This only works if the vehicle is equipped with a suitable sensor.
Saving camera settings.
Exiting camera.
You can press the function keys even if the camera is set to full screen mode.
You have connected and activated the camera.
1. Switch to the "Camera" screen:
| Service |
|
⇨
The following screen will appear
2. Use the function keys to control the camera.
Configuring the joystick button allocations
The terminal offers you the possibility of assigning the functions of an ISOBUS job computer to the
buttons of the joystick. To do so, the ISOBUS job computer and the joystick must fulfil the Auxiliary 2
specification requirements from the ISOBUS standard.
Procedure
7.9
