manualshive.com logo in svg

Me TRACK-Guide II, Installation And Operating Instructions Manual

Share
Download
Me TRACK-Guide II Installation And Operating Instructions Manual Download Page 12

  

4 

Mounting and installation 
Mounting the terminal in the tractor cab 

 

  

  

12 

V7.20160121 

30302710-02-EN 

  

 

Mounting and installation 

Mount the terminal and all additional components in the following order: 
1.  Mount the terminal in the tractor cab. 
2.  Connect the terminal to the voltage supply (port A). 
3.  Connect the terminal to the GPS receiver (port C). 
4.  Connect the working position sensor (optional, port B). 

 

Mounting the terminal in the tractor cab 

  

 

NOTICE 

Electromagnetic interference 
The operation of the terminal may be impaired by electromagnetic waves emitted by other farm 
equipment. 

◦  Mount the terminal at least 1 m away from the radio antenna or from a radio device. 

 

 

1.  Screw the bracket to the terminal. 

 

2.  Mount the terminal with the bracket installed inside the tractor cab. 

For instance, you can use the ME mounting bracket for this purpose. 

 

Base console 

4 

4.1 

Procedure 

Summary of Contents for TRACK-Guide II














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands