Me GSV-4, Operating Instructions Manual

Page: 34 / 53

Commands Code p1 p2 p3 p4 p5 p6 p7 p8 p9
get_digital_port A BF
set_can_bitrate C0 B
get_can_bitrate C1
reserviert C2
reserviert C3
set_can_id C5 B HB B B LB
get_can_id C6 B
reserviert C7 ch
reserviert C8 ch
reserviert D0 B B B B B B B
reserviert D1 ch
reserviert D2 B B
reserviert D3
reserviert D4
reserviert D5 B B
reserviert D6
Table 4: Command list for GSV-4 (ch = channel number), B = byte, HB = high byte, LB = low byte)
Commands in grey are reserved for the initial setup or calibration. The commands shaded
grey are only available after restarting.
Description of commands
set_gain (B2)
With the command set_gain, the 4 inputs on the measuring amplifier can be configured
individually for various sensor types.
Parameters in HEX Description
01 Straingage input ±2 mV/V
02 Straingage input ±10 mV/V
03 Analogue input 0-5 V
04 Input for PT1000 -40°C ... 1000 °C
06 Input for K-thermocouple cable -40°C ... 1000 °C
07 Analogue input 0 – 10 V
ME-Meßsysteme GmbH
Neuendorfstr. 18a
Tel.: +49 3302 89824 60 Mail: info@me-systeme.de
34 16761 Hennigsdorf Fax: +49 3302 89824 69 Web: www.me-systeme.de