Technical Manual
Motion Detector/Automatic Switch 55/63
Series .02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
56
56
The following picture shows the submenu for logic:
Figure 38: Settings
–
Logic
With the logic function, different objects can be logically linked. Each logic function can link and
evaluate up to 2 internal objects and up to 4 external objects. The sending behaviour of the output
can be adjusted via the sending condition.
The following table shows the parameter settings for the logic:
ETS-Text
Dynamic range
[Default value]
Comment
Function
•
AND
•
OR
•
XOR
Setting of the logic function
Output object
•
switch
•
scene
•
value
•
forced guidance 2bit
Setting the output object for the logic
Scene number for
output value
“False/True”
not active
1
–
64
Visible with
“Output object” –
“Scene”
.
Setting the scene number to be sent
Datapoint type
•
1 Byte Decimal (DPT
5.005)
•
1 Byte Percent (DPT
5.001)
Visible with
“Output object” –
“Value”
.
Setting the DPT for value to be sent
Percent value for
output value
“False/True”
0
–
100 %
[0 %]
Visible with
“1 Byte Percent”
.
Setting the value to be sent
Value for output
value “False/True”
0 … 255
[0 %]
Visible with
“1Byte Decimal”
.
Setting the value to be sent
