Technical Manual
Motion Detector/Automatic Switch 55/63
Series .02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
55
55
4.10 Logic
4.10.1 Activation of the logic function
The following picture shows the activation of logic functions 1-4:
Figure 36: Settings
–
Activation of the logic function
After activating the logic function, a submenu for the corresponding logic function is displayed in
which the logic can be further configured accordingly.
The parameter "
Request inputs after bus voltage return
" defines whether the external inputs of the
logics are to be actively requested after a restart.
4.10.2 Logic settings
There are 2 text fields available:
Figure 37: Settings
–
Text fields logic function
Texts with up to 40 characters can be stored for both fields.
The text entered for the "
Description of function
" appears in the menu behind the corresponding
logic as well as with the communication objects of the logic.
The “
Additional text
” is merely additional information to the logic. This is not visible anywhere else.
