MDT SCN-BWM55.02, Technical Manual

Page: 50 / 61

Technical Manual
Motion Detector/Automatic Switch 55/63
Series .02
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
50
50
LED white (Night light)
•
not active
•
active at „Night“ and when
motion (Light channel 1)
•
active at „Night“ and when
motion (Light channel 2)
•
active at „Night“ and when
motion
(Light channel 1 and 2)
•
active at „Night“ via
external object „switch“
•
always active at „Night“
Setting whether and how the white
LED (Night light) is switched on.
Brightness at „Night“ 0 – 100%
[10%]
Only shown if "Night" is active.
Defines the brightness value at
which the white LED switches on.
Display button operation
with white LED
•
not active
•
active
Setting whether the white LED
should light up when the button is
pressed.
Only available for device with
buttons and when buttons are
active!
Light channel 1
Display „manual mode
ON“ with green LED
•
not active
•
active
Setting whether LED green/red
should indicate the status (only
light channel 1) for manual
operation or forced guidance/lock.
Display „manual mode
OFF“ with red LED
•
not active
•
active
Display “ lock/forced
guidance ON” with green
LED
•
not active
•
active
Display “ lock/forced
guidance OFF” with red
LED
•
not active
•
active
Table 42: Settings – LED
The following table shows the available communication objects:
Number
Name/Object Function Length Usage
91 LED green – Switch 1 Bit Object only available if
"active via external object" is set.
Controlling the LED via an external object
92 LED red – Flashing 1 Bit Control of the LED via an external object
93 LED white – Switch 1 Bit Object only available if
"active via external object" is set.
Controlling the LED via an external object
Table 43: Communication objects – LED
Important: When the white LED (Night light) is active, the brightness value is not evaluated!