Technical Manual
Motion Detector/Automatic Switch 55/63
Series .02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
5
5
2.2 Connection diagram
Figure 1: Connection diagram
2.3 Structure & Handling
The following picture shows the structure of the MDT Motion Detector/Automatic Switch (with the
example of SCN-BWMxxT.x2):
Figure 2: Overview
–
Hardware module
1 = KNX bus connection terminal
2 = Programming button
3 = LED red
4 = LED white
5 = Brightness sensor
6 = LED green
7 = Sensor buttons (only SCN-BWMxxT.x2)
S1/S2 = Sensor 1/Sensor 2
