Technical Manual
Motion Detector/Automatic Switch 55/63
Series .02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
44
44
4.5.2.2 Basic function
–
Switch/send values short/long (with 2 objects)
Single-button function
The following figure shows the available settings:
Figure 27: Settings
–
Single-button function: Switch/send values short/long (with 2 objects)
The following table shows the available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Action for short/long
keypress
▪
OFF
▪
ON
▪
toggle
▪
send value
▪
not active
Setting the function for the
short/long button.
Datapoint type
▪
1Byte DPT 5.005
Decimal factor (0…255)
▪
1Byte DPT 5.001 Percent (0…100%)
▪
1Byte DPT 17.001 Scene number
Only shown if "Action
….
" is set
to "Send value".
Setting of the data point type for
the value to be sent.
Table 33: Settings
–
Single-button function: Switch/send values short/long (with 2 objects)
With this basic function, 2 different values can be sent for the short and long button. The short and
long buttons have different objects, so it is also possible to send different types of datapoints.
“
OFF
” or “
ON
":
The same, fixed value is always sent.
"
toggle
":
ON/OFF is sent alternately.
"
send value
":
The set value is always sent, either a percentage value (0 - 100%),
decimal value (0
–
255), or scene (1 - 64).
The following table shows the available communication objects:
Number
Name/Object Function
Length
Usage
131
Button left short:
–
switch, toggle, send value
…
Sending the value for the short button.
DPT depending on the parameter setting
132
Button left short:
–
Status for toggle
1 Bit
Status to update the button. Must be linked to
the status of the actuator to be switched
(for subfunction "toggle").
133
Button left long:
–
switch, toggle, send value…
Sending the value for the long button.
DPT depending on the parameter setting
134
Button left long:
–
Status for toggle
1 Bit
Status to update the button. Must be linked to
the status of the actuator to be switched
(for subfunction "toggle").
Table 34: Communication objects
–
Single-button function: Switch short/long
