MDT SCN-BWM55.02, Technical Manual

Page: 21 / 61

Technical Manual
Motion Detector/Automatic Switch 55/63
Series .02
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
21
21
As an alternative to the force control object, 1 or 2 locking objects of size 1 bit can be displayed.
3 different states can be configured for the lock object:
•
Lock motion (lock current state)
The channel is locked in its current state and remains locked until the locking process is
deactivated.
•
Switch ON
The light channel sends the output value ON and remains in the ON state until the locking
process is deactivated.
•
Switch OFF
The light channel sends the output value OFF and remains in the OFF state until the locking
process is deactivated.
By activating "
Lock object ON ", the light channel sends the output value ON and remains in the ON
state until the locking process is deactivated.
With the parameter “ Fallback of forced guidance/lock (general setting)” , it is possible to set
individually for each channel whether it should react to the configuration for "Fallback of forced
guidance/lock" in the "General settings" or not.
The following table shows the corresponding communication objects:
Number
Name/Object Function Length Usage
8
Light channel 1 - Input – Lock
object
1 Bit Locking the light channel
8 Light channel 1 - Input –
Forced guidance
2 Bit Activate/deactivate forced guidance
9 Light channel 1 - Input –
Lock object ON
1 Bit Switching on the light channel and locking
the light channel in the ON state
68 HVAC - Input – Lock object 1 Bit Locking the light channel
68 HVAC - Input – Forced guidance 2 Bit Activate/deactivate forced guidance
69 HVAC - Input – Lock object ON 1 Bit Switching on the light channel and locking
the light channel in the ON state
Table 9: Communication objects – Forced guidance/lock