MDT KNX Smart 55 BE-JTA5504.01 Technical Manual Download Page 56 | Manualshive

Page: 56 / 62

background image

Technical Manual
Blind Push Button Smart 55

BE-JTA5504.01

MDT technologies GmbH •

51766 Engelskirchen • Papiermühle 1

Phone: +49-2263-

880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de

56

56

4.7 "Settings" menu (in the device)

In the “Settings” menu, various changes can be made to the push-button itself.

The menu is accessed either by pressing buttons 3/4 simultaneously or by configuring the individual
buttons 3 or 4 accordingly.

The buttons are activated via the "Button functions" menu, see

4.4 Button functions

For buttons 3 and 4, the function "Change to settings menu (internal connection)" has to be activated.

Activation of the "Settings" menu

:

If the buttons 3/4 are pressed simultaneously or button 3 or 4 is pressed, the settings menu opens in
the display. The corresponding menu item can now be selected with the buttons 1 "˅" and 2 "˄".
The following options are available:



Time switch



Lock time switch



Date / Time



Shading



Time switch reset

The items "Time switch", "Date / Time" and "Time switch reset" are permanently available.
The items "Shading" and "Lock time switch" have to be activated first in the "Display settings" menu
in order to be displayed.

Important:

If no change is made in the “Settings” menu, the display jumps back to normal operation after a set
time of 20 seconds after the last operation!

4.7.1 Start screen of the “Settings” menu

(including activated "Shading" and "Lock time switch")

Pressing button 4 (bottom right of the display) "

Select

" executes the displayed action.

Pressing button 3 (bottom left of the display) "

Back

" exits the Settings menu.

The scroll bar on the left side means that there are more than the three menu items displayed. These
become visible by pressing the buttons 1 "˅" or 2 "˄".

«
...
54
55
56
57
58
...
»

Summary of Contents for KNX Smart 55 BE-JTA5504.01































































Reviews:

No comments

Related manuals for KNX Smart 55 BE-JTA5504.01

Vision 32 Open Cassette

Brand: Louvolite Pages: 8

Midi Line Series

Brand: Swiss Sonnenschutz Pages: 3

Brand: Velux Pages: 9

Brand: Velux Pages: 16

Brand: Dometic Pages: 2

Brand: Dometic Pages: 4

Brand: Dometic Pages: 8

Brand: Dometic Pages: 92

Rollerblind PrecisionRise

Brand: Dometic Pages: 132

Oceanair SKYSCREEN

Brand: Dometic Pages: 160

Brand: Dometic Pages: 160

Brand: Dometic Pages: 660

System 3 E-Series

Brand: Andersen Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands