MDT KNX Smart 55 BE-JTA5504.01 Technical Manual Download Page 41 | Manualshive

Page: 41 / 62

background image

Technical Manual
Blind Push Button Smart 55

BE-JTA5504.01

MDT technologies GmbH •

51766 Engelskirchen • Papiermühle 1

Phone: +49-2263-

880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de

41

41

4.4.3.8 External function – Basic function: One-button blinds

The following figure shows the available settings:

Figure 26: Settings – Basic function: One-button blinds

Two communication objects appear for the blind function. On the one hand, the function for the
stop/step object "Slat adjustment / stop" and, on the other hand, the function for the movement
object "Blinds Up/Down".
The movement object is used to raise and lower the blinds/shutters. The stop/step object is used to
adjust the slats and it stops the upward or downward movement if the end position has not yet been
reached.

The one-button function is a "toggle" function. This means that it is changed between Up and Down
after each push of the button. This can be influenced via the "

Status for change of direction

" object.

If, for example, the direction of movement is changed from elsewhere, the shutter actuator sends
the current direction to the "Status for change of direction" object and the button sends the opposite
direction the next time the button is pressed.
It is also possible to swap the

operation function for the long and short button

. In this way, it is

possible to select whether to move via a long or a short button press. The stop/step object then
adopts the other operating concept in each case.
Only one object is available as "

status for display

". It refers to the height position. The position for

the slat cannot be displayed.

For details on the

button/object description

and the

lock object

, see

4.4.1 Identical parameter

For details about

display

, see

4.4.3.1 Identical Settings – Representation on the display

The following table shows the available communication objects:
Number

Name/Object Function

Length Usage

15

Button 3: –
Blinds Up/Down

1 Bit

Up/Down for the Shutter actuator

16

Button 3: –
Slat adjustment / Stop

1 Bit

Open/close command of the slats or the stop
command for the shutter actuator

17

Button 3 –
Status for change of direction

1 Bit

Receiving the status with current information
about the direction of the shutter actuator

18

Button 3: –
Status for display

1 Byte

Receiving the status of the current blind/shutter
position

+5

Button 4

Table 26: Communication objects – Basic function: One-button blinds

«
...
39
40
41
42
43
...
»

Summary of Contents for KNX Smart 55 BE-JTA5504.01































































Reviews:

No comments

Related manuals for KNX Smart 55 BE-JTA5504.01

Brand: HunterDouglas Pages: 35

OPEN ROLL Z-125

Brand: SelectBlinds Pages: 12

Brand: Velux Pages: 39

Saxun Plisada Glass 111

Brand: Gimenez Ganga Pages: 2

Brand: Inspire Pages: 2

Brand: Inspire Pages: 12

Brand: Inspire Pages: 28

Brand: Griesser Pages: 6

Brand: Griesser Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands