MDT KNX Smart 55 BE-JTA5504.01 Technical Manual Download Page 38

Page: 38 / 62

Technical Manual
Blind Push Button Smart 55

BE-JTA5504.01

MDT technologies GmbH •

51766 Engelskirchen • Papiermühle 1

Phone: +49-2263-

880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de

4.4.3.6 External function – Basic function: Switch short/long

The following figure shows the available settings:

Figure 24: Settings – Basic function: Switch short/long

The following table shows all available settings:
ETS-Text

Dynamic range

[Default value]

Comment

Value for short/long button –
Object 1/2



Off



toggle



send value



not active

Setting the function for the
short/long button.

Send value



1Byte value



1Byte percent value



absolute position
Blinds/Shutter



Scene number

Setting only available if "Value for
short/long button" is set to "Send
value".

Setting the data point type for the
value to be sent.

Table 23: Settings – Basic function: Switch short/long

With the basic function "

switch short/long

", 2 different values - for the short and long button - can

be sent. The short and long buttons have different objects, which also makes it possible to send
different types of data points.
With "

send value: On

" or "

send value: Off

", the same, fixed value is always sent.

With "

toggle

", On/Off is sent alternately.

With "

Send value

", the set value (percentage value, decimal value or scene) is always sent. The

adjustable values are 0 - 100% (percentage value), 0 - 255 (value) or 1 - 64 (scene). With the
"

Absolute position roller Blinds/Shutter

" setting, 2 values (height and slat position) are sent.

The status display always applies to the "short button" / object 1 !

Attention:

When selecting "Send value" => "Absolute position Blinds/Shutter", 2 values each (for

height and for slats) are sent. For this,

no status can be displayed for the settings "Symbol by

status" and "Value/text by status"

For details on the

button/object description

and the

lock object

, see

4.4.1 Identical parameter

For details about

display

, see

4.4.3.1 Identical Settings – Representation on the display

The time for "

long keypress

" is defined in the "

Button functions

" menu.

Summary of Contents for KNX Smart 55 BE-JTA5504.01































































Search results

Summary of Contents for KNX Smart 55 BE-JTA5504.01

Reviews:

Related manuals for KNX Smart 55 BE-JTA5504.01

Brands by name

Popular brands

MDT KNX Smart 55 BE-JTA5504.01, Technical Manual

Search results

Summary of Contents for KNX Smart 55 BE-JTA5504.01

Reviews:

Related manuals for KNX Smart 55 BE-JTA5504.01

Brands by name

Popular brands