Technical Manual – IP Router SCN-IP100.03
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
50
50
6.2 Overview Web-Interface
After calling up the web interface, the login window appears:
Figure 37: Web Interface – Login window
After a successful login, the menus can be selected on the left side. The menus have the following
functions:
Device Info
The menu “Device Info” contains information and settings of the IP Router, such as MAC
address, IP address, network settings, software version, etc.
Prog.Mode
In the menu “Prog. Mode” the programming LEDs for the TP and the IP side can be switched
ON and OFF. Furthermore, the allocated physical addresses, the tunneling addresses and
serial number can be seen.
In the menu “Email” the e-mail functionality can be set, see also 6.3 .
Time
In the menu “Time”, information concerning the time server can be viewed.
Firmware Update
It is possible to perform a firmware update for the IP Router.
For more information see 2.7 Firmware Update.
If you have any questions, please contact MDT Support at