Technical Manual – IP Router SCN-IP100.03
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
11
11
2.8.2 Area coupler
The following figure shows the IP router as an area coupler:
Figure 3: IP Router as area coupler
In larger KNX installations the IP router can assume the function of an area coupler. For this it needs
to get the physical address of an area coupler (1.0.0 ... 15.0.0). Currently, in an ETS project up to 15
areas can be applied with area couplers.
In the above example each area got 2 subordinated lines, which e.g. can be linked with the line
coupler SCN LK001.01.
