Technical Manual
Glass Push-button II Smart & Push-button Smart 86 [Series .02]
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1 • Germany
Phone: +49-2263-
880 • [email protected] • www.mdt.de
86
86
4.5.2 LED 1-12/A/B
The following figure shows the available settings for all active LEDs:
Figure 45: Settings
–
LED 1-12/A/B
The table below shows all available settings:
ETS-Text
Dynamic range
[Default value]
Comment
LED
▪
not active
▪
active
Activation of the LED
LED reacts to
▪
external object
▪
internal object
▪
button activation
▪
external object and button
activation
▪
internal object and button
activation
Setting how LED is to be controlled.
Selection of object
number
any object 0 … 157
[0]
Link to internal object.
Only available if LED reacts to
internal object.
Datapoint type
▪
1Bit DPT 1.001 Switch
▪
1Byte DPT 5.001 Percent
value
(0…100%)
▪
1 Byte DPT 5.005 Decimal
factor (0…255)
Selection of the datapoint type for
external object.
Only available if LED reacts to
"external object".
