Technical Manual
Glass Push-button II Smart & Push-button Smart 86 [Series .02]
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1 • Germany
Phone: +49-2263-
880 • [email protected] • www.mdt.de
73
73
4.4.10 Blinds/Shutter
Single-Button function
Two-Button function
Slap-Button
The blinds/shutter function is used to control shutter actuators, which can be used for the
adjustment and control of blinds/shutters.
The following figure shows the available settings (here: Two-button function):
Figure 37: Settings
–
Blinds/Shutter
The following table shows the available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Button assignment
(left/right)
▪
Up/Down
▪
Down/Up
Only with two-button function!
Setting the key assignment
(upper/left or lower/right key) for
the up/down function
Operation function
▪
long=Up/Down (or “move”)/
short=Stop / Slats Open/Close
▪
short=Up/Down (or “move”) /
long=Stop / Slats Open/Close
▪
short=Up/Down/Stop
(MDT Single Object Control)
▪
short=Up/Down/Stop /
long=Central object
(MDT Single Object Control)
Setting the concept of how to
operate with long/short buttons.
Functions with "MDT Single
Object Control" only available
with two-button function!
Time for long
keypress
Basic setting
0,1 s
–
30 s
Setting of an individual time from
when a long keystroke is detected
Innovative group control
(Only with setting
„
long=Up/Down / short=Stop/Slats Open/Close
“
)
Group control extra
long
▪
not active
▪
active
Activation of a further function
with extra long keystroke
Time for extra-long
keypress
0,1 s
–
30,0 s
[1,5 s]
Setting of an individual time from
when an extra long keystroke is
detected
Table 55: Settings
–
Blinds/Shutter
