Technical Manual
Glass Push-button II Smart & Push-button Smart 86 [Series .02]
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1 • Germany
Phone: +49-2263-
880 • [email protected] • www.mdt.de
70
70
The following table shows the available communication objects:
Number Name/Object Function
Length Usage
0
F1:
F1/2:
–
Mode selection (HVAC Mode)
1 Byte Switchover of operating mode
1
F1:
F1/2:
–
Status HVAC Mode
1 Byte Receives the status of the heating actuator
/ temperature controller
1
F1:
F1/2:
–
HVAC Status
1 Byte Receives the status of the heating actuator
/ temperature controller
Table 51: Communication objects
–
Mode selection
Presentation
Single-Button function
Two-Button function
To each operating mode, a fixed symbol is assigned. The colour of the symbol can be adjusted for any
operating mode:
Figure 34: Presentation
–
Mode selection
