Technical Manual
–
Central Operation Unit Smart
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
38
38
4.6.4 Lock changing the time switch
This function blocks all changes of the time switch for unauthorized users as soon as the "time switch
lock" is set.
Figure 16: PIN Code
–
Lock changing the time switch
The lock for changing the time switches can be set or unlocked in this mode in the menu Timer ->
Setup via key 6. The change of the lock status becomes effective as soon as the correct PIN code has
been entered.
4.6.5 Enter PIN code on the device
The following figure shows the PIN code entry before locking for the functions "Alarm system
control" / "Button function with PIN code":
1 = The large numbers show the action for the short keystroke
2 = The small numbers show the action for the long keystroke
3 = With button 6 "Cancel" the input menu for the PIN code entry is left and the previous screen is
returned to.
The white button LEDs indicate the unlocked state.
