Technical Manual Switch Actuator 3-fold, FanCoil
MDT technologies GmbH
•
51766 Engelskirchen
•
Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• [email protected] • www.m
dt.de
49
6 Parameter - FanCoil
6.1 General Functions
6.1.1 FanCoil-System
The following parameter adapts the actuator to the FanCoil-System:
Figure 33: Selection of the FanCoil system
2-Pipe, only heating:
The following image shows a 2-Pipe system for a heating mode. The FanCoil is controlled directly
from the FanCoil-Actuator, AKK-03UP.01. The heating valve is switched by a separate actuator, which
is controlled by object 6:
Figure 34: 2-Pipe system - Heating
2-Pipe, only Cooling:
The following image shows a 2-Pipe system for a cooling mode. The FanCoil is controlled directly
from the FanCoil-Actuator, AKK-03UP.01. The cooling valve is switched by a separate actuator, which
is controlled by object 7:
Figure 35: 2-Pipe System - Cooling
Summary of Contents for AKK-03UP.02
Page 6: ......
