16
7.
Return to the cab and start your wheel loader; raise the boom to approximately 6ft.
8.
Slowly roll the bucket over to begin the removal process.
9.
Using the parking stand and the grapple tines as legs, place the grapple on the ground.
10.
Remove the clips from the T-handle pins.
11.
Ideally, you will only have to loosen but not remove the whiz nuts on the Adjustable
Locking Plate. If you run out of adjustment, then remove the whiz nuts and rotate until
allowed more adjustment.
Clip
Adjustable Locking Plate
Whiz Nut
T-Handle Pin
