ANI Monitor V1 - Continouous analgesia monitoring system
MD/PRD/IN16.ANIV1 V.10 – 29 SEP 2021
10
THE ANI Monitor V1 IN OPERATING SURGICAL ROOM MUST BE PLACED
OUTSIDE THE SAFETY CONE OF EXPLOSION RISK.
TO AVOID THE HAZARD OF BURNS BE SURE THE MONITOR IS INSTALLED
OUTSIDE THE SURGICAL SECURITY AREA AND AS FAR AS POSSIBLE FROM
LIQUID INGRESS TO PREVENT SYSTEM DAMAGE.
IF THE MONITOR SHOULD BE OPEN ANY MODIFICATIONS ARE ALLOWED TO
BE DONE.
1.2
Cautions
Read this entire manual carefully before using the monitor in a clinical setting.
Before starting, please ensure there are no USB devices (USB stick for example)
connected to the monitor.
Equipment should not be reachable by the patient.
ANI Monitor V1 should not be used adjacent or stacked with other equipment.
If adjacent or
stacked use is necessary, the monitor should be observed to verify normal operation in the
configuration in which it will be used.
Patient and equipment should not be touched simultaneously by the doctor.
Unused monitor ports should not be connected with other devices.
Do not autoclave the monitor or the acquisition device. Autoclaving will seriously damage
both components.
